Membrane Properties Research Articles

Self-Assembled Hydrogel Membranes with Structurally Tunable Mechanical and Biological Properties.

Using supramolecular self-assembled nanocomposite materials made from protein and polysaccharide components is becoming more popular because of their unique properties, such as biodegradability, hierarchical structures, and tunable multifunctionality. However, the fabrication of these materials in a reproducible way remains a challenge. This study presents a new evaporation-induced self-assembly method producing layered hydrogel membranes (LHMs) using tropocollagen grafted by partially deacetylated chitin nanocrystals (CO-g-ChNCs). ChNCs help stabilize tropocollagen's helical conformation and fibrillar structure by forming a hierarchical microstructure through chemical and physical interactions. The LHMs show improved mechanical properties, cytocompatibility, and the ability to control drug release using octenidine dihydrochloride (OCT) as a drug model. Because of the high synergetic performance between CO and ChNCs, the modulus, strength, and toughness increased significantly compared to native CO. The biocompatibility of LHM was tested using the normal human dermal fibroblast (NHDF) and the human osteosarcoma cell line (Saos-2). Cytocompatibility and cell adhesion improved with the introduction of ChNCs. The extracted ChNCs are used as a reinforcing nanofiller to enhance the performance properties of tropocollagen hydrogel membranes and provide new insights into the design of novel LHMs that could be used for various medical applications, such as control of drug release in the skin and bone tissue regeneration.

Microstructure and performance modification of PVDF ultrafiltration membrane via adjusting the composition of coagulation Bath

AbstractIn this paper, the effect of the composition of a nonsolvent bath on the physicochemical properties of the polyvinylidene fluoride (PVDF) ultrafiltration membranes were comprehensively investigated using the nonsolvent‐induced phase separation method. Three additives (ethanol, glycerol, or NaCl) were added to the water coagulation bath respectively to obtain different membranes. It was found that the microstructure of the membranes changed from finger‐like structure to the sponge‐like structure with the increase of additives concentration, which successfully improved the retention and mechanical properties of the membranes. In addition, the membrane surface became smoother and more hydrophilic. The membrane fabricated in 30 wt% glycerol bath exhibited outstanding comprehensive properties of retention and anti‐fouling, with a water flux of 243.5 L/(m2 h), a bovine serum albumin rejection of more than 90%, and a flux recovery rate of 97%. From mechanism analysis, the addition of ethanol, glycerol, or NaCl to the coagulation bath altered the thermodynamic stability of the polymer system, and slowed down the rate of solvent and nonsolvent diffusion from a kinetic perspective. This research provides important clues for optimizing the membrane properties, such as flux, rejection, and strength.

Multifaceted Activity of Fabimycin: Insights from Molecular Dynamics Studies on Bacterial Membrane Models.

Membranes─cells' essential scaffolds─are valid molecular targets for substances with an antimicrobial effect. While certain substances, such as octenidine, have been developed to target membranes for antimicrobial purposes, the recently reported molecule, fabimycin (F2B)─a novel agent targeting drug-resistant Gram-negative bacteria─has not received adequate attention regarding its activity on membranes in the literature. The following study aims to investigate the effects of F2B on different bacterial membrane models, including simple planar bilayers and more complex bilayer systems that mimic the Escherichia coli shell equipped with double inner and outer bilayers. Our results show that F2B exhibited more pronounced interactions with bacterial membrane systems compared to the control PC system. Furthermore, we observed significant changes in local membrane property homeostasis in both the inner and outer membrane models, specifically in the case of lateral diffusion, membrane thickness, and membrane resilience (compressibility, tilt). Finally, our results showed that the effect of F2B differed in a complex system and a single membrane system. Our study provides new insights into the multifaceted activity of F2B, demonstrating its potential to disrupt bacterial membrane homeostasis, indicating that its activity extends the currently known mechanism of FabI enzyme inhibition. This disruption, coupled with the ability of F2B to penetrate the outer membrane layers, sheds new light on the behavior of this antimicrobial molecule. This highlights the importance of the interaction with the membrane, crucial in combating bacterial infections, particularly those caused by drug-resistant strains.

Cellular uptake of active nonspherical nanoparticles

Due to the potential applications in biomedical engineering, it becomes more and more important to understand the process of engulfment and internalization of nanoparticles (NPs) by cell membranes. Despite the fact that the interaction between cell membranes and passive particles has been widely studied, the interaction between cell membranes and self-propelled nonspherical NPs remains to be elucidated. Here, we present a theoretical model to systematically investigate the influence of the active force, aspect ratio of NPs, particle size, and membrane properties (adhesion energy density and membrane tension) on the cellular uptake of a nonspherical nanoparticle. It is found that the active force generated by an NP can trigger a type of first-order wrapping transition from a small partial wrapping state to a large one. In addition, the phase diagram in the force-aspect ratio (particle size, adhesion energy density, and membrane tension) space displays more complex behaviors compared with that for the passive wrapping mediated merely by adhesion. These results may provide useful guidance to the study of activity-driven cellular entry of active particles into cells.

The characteristics of high temperature polymer electrolyte membranes for fuel cell based on 2-pyridene based polybenzimidazole blended with poly(vinyl-phosphonic acid)

The present study has focused on exploring new 2-pyridine-bridge-based polybenzimidazole (2-Py-PBIs) based materials for various energy-related uses in proton exchange membrane fuel cells (PEMFC). An electrochemical device, which transforms chemical energy into electrical energy, is known as fuel cell. Using solution polymerization with polyphosphoric acid as a solvent, a series of 2-Py-PBIs were synthesised from the 4,4'-([2,4′-bipyridine]-2′,6′-diyl)bis (benzene-1,2-diamine). 2-Pyridine bridge Polybenzimidazoles are cross-linked with poly (vinylphosphonic acid), which helps us to improve membrane properties like mechanical properties and proton conductivities. FT-IR was used to characterize chemical structure, Ubbelohde viscometer was employed to determine the inherent viscosity. Additionally investigated were the oxidative stability, swelling ratio, ion exchange capability, and water uptake for 2-Py-PBIs. Thermogravimetric analysis is used to evaluate thermal stability. The obtained 2-Py-PBIs membranes were thermally stable and mechanically strong when compared with conventional polybenzimidazole-based membranes. The 2-Py-PBIs:PVPA membranes showed proton conductivity between 0.10 µS/m to 4.65 µS/m.

Dual-network fiber-hydrogel membrane for osmotic energy harvesting

Osmotic energy harvesting was a promising way to alleviate energy crisis with reverse electrodialysis (RED) membrane-based technology. Charged hydrogel combined with other materials was an effective strategy to overcome problems, including restricted functional groups and complicated fabrication, but the effect of the respective charges of the two materials combined on the membrane properties has rarely been studied in depth. Herein, a new method was proposed that charged hydrogel was equipped with charged filter paper to form dual network fiber-hydrogel membrane for osmotic energy harvesting, which had excellent ion selectivity (beyond 0.9 under high concentration gradient), high ion transference number and energy conversion efficiency (beyond 32.5% under wide range concentration gradient), good property of osmotic energy conversion (∼4.84 W/m2 under 50-fold KCl and ∼6.75 W/m2 under simulated sea water and river water). Moreover, the power density was attributed to the surface-space charge synergistic effect from large amounts overlapping of electric double layer (EDL), so that the transmembrane ion transport was enhanced. It might be a valid mode to extensively develop the osmotic energy harvesting.

Driving Role of Zinc Oxide Nanoparticles with Different Sizes and Hydrophobicity in Metabolic Response and Eco-Corona Formation in Sprouts (Vigna radiata).

Zinc oxide nanoparticles (ZnO NPs) cause biotoxicity and pose a potential ecological threat; however, their effects on plant metabolism and eco-corona evolution between NPs and organisms remain unclear. This study clarified the molecular mechanisms underlying physiological and metabolic responses induced by three different ZnO NPs with different sizes and hydrophobicity in sprouts (Vigna radiata) and explored the critical regulation of eco-corona formation in root-nano systems. Results indicated that smaller-sized ZnO inhibited root elongation by up to 37.14% and triggered oxidative burst and apoptosis. Metabolomics confirmed that physiological maintenance after n-ZnO exposure was mainly attributed to the effective stabilization of nitrogen fixation and defense systems by biotransformation of the flavonoid pathway. Larger-sized or hydrophobic group-modified ZnO exhibited low toxicity in sprouts, with 0.89-fold upregulation of citrate in central carbon metabolism. This contributed to providing energy for resistance to NP stress through amino acid and carbon/nitrogen metabolism, accompanied by changes in membrane properties. Notably, smaller-sized and hydrophobic NPs intensely stimulated the release of root metabolites, forming corona complexes with exudates. The hydrogen-bonded wrapping mechanism in protein secondary structure and hydrophobic interactions of heterogeneous functional groups drove eco-corona formation, along with the corona evolution intensity of n-ZnO > s-ZnO > b-ZnO based on higher (α-helix + 3-turn helix)/β-sheet ratios. This study provides crucial insight into metabolic and eco-corona evolution in bionano fates.

Integration of proton exchange membrane fuel cell with air gap membrane distillation for sustainable electricity and freshwater cogeneration: Performance, influential mechanism, multi-objective optimization and future perspective

Proton exchange membrane fuel cell (PEMFC) converts vast majority of hydrogen energy into waste heat, resulting in energy wasting, membrane drying and even lifetime shortening. Herein, air gap membrane distillation is proposed to immediately remove and harness the waste heat from PEMFC for additional freshwater production. By quantifying the irreversible thermodynamic and electrochemical losses, mathematical formulas for the water production, power generation and overall efficiency are derived to evaluate the system performance. After a rigorous model validation, the performance feature, feasibility and competitiveness of the proposed system are examined. The integration system achieves a peak power density 23.69 % higher than that of a single PEMFC at 353 K, with a corresponding increase in exergy efficiency by 3.61 %. In addition, the influential mechanisms of the PEMFC operating conditions, air gap thickness, coolant temperature, and properties of the proton exchange membrane and hydrophobic porous membrane are investigated to discern potential avenues for further performance improvement. The gradient-based local sensitivity analyses further determine the optimal parameter regulation strategies for different output targets. The economic study indicates that the levelized costs of water and electricity over the total lifecycle are 21.53 $ m−3 and 0.061 $ kWh−1, respectively. The multi-objective optimization, integrating genetic algorithm and the technique for order preference by similarity to an ideal solution, maximizes the exergy efficiency and output power density while minimizing the initial investment cost per unit area, with values of 42.84 %, 0.975 W cm−2, and 27.33 $ cm−2, respectively.

Estimation of mixed-gas selectivity of membranes using the linear friction-based model

The development of analytical models for predicting the transport properties of membranes in the separation of multicomponent mixtures is highly relevant because (1) measurements of permeability and sorption of gas mixtures in membrane materials are laborious and time-consuming, and (2) estimation of transport properties based on pure gas measurements is desirable, however, rather unreliable and can lead to serious errors. In this paper, within the framework of the well-known frictional-coefficient formalism, we present nonlinear equations for the fluxes of gas mixture components through the membrane, which take into account the diffusional coupling of the fluxes compared to independent gas transport. As a result, an analytical equation for the mixed-gas selectivity was obtained. This equation has an implicit form, which is not quite convenient for practical application, since it has to be solved numerically. A simple explicit expression for mixed gas selectivity was derived using the so-called linear transport model, which is a linearized version of the original nonlinear flux equations. It is important to emphasize that a comparison of the linear model with the formally more rigorous nonlinear model showed only minor quantitative differences. The input parameters for the model are the single gas transport parameters. Testing the linear model using experimental data for the separation of hydrocarbons (n-butane/methane, n-butane/i-butane, propylene/propane) revealed an acceptable fit. A comparison of the model with recent experimental data on the separation of CO2-containing mixtures using microporous polymers is also presented. It is found that the calculated CO2/N2 mixed gas selectivity is in good agreement with the experimental data, while only a semi-quantitative agreement is observed for the CO2/CH4 separation. Besides, it is shown that the model developed for binary gas separation can be extended to ternary gas mixtures.

Interactions of Brominated Flame Retardants with Membrane Models of Dehalogenating Bacteria: Langmuir Monolayer and Grazing Incidence X-ray Diffraction Studies.

Brominated flame retardants (BFRs) are small organic molecules containing several bromine substituents added to plastics to limit their flammability. BFRs can constitute up to 30% of the weight of some plastics, which is why they are produced in large quantities. Along with plastic waste and microplastic particles, BFRs end up in the soil and can easily leach causing contamination. As polyhalogenated molecules, multiple BFRs were classified as persistent organic pollutants (POPs), meaning that their biodegradation in the soils is especially challenging. However, some anaerobic bacteria as Dehaloccocoides can dehalogenate BFRs, which is important in the bioremediation of contaminated soils. BFRs are hydrophobic, can accumulate in plasma membranes, and disturb their function. On the other hand, limited membrane accumulation is necessary for BFR dehalogenation. To study the BFR-membrane interaction, we created membrane models of soil dehalogenating bacteria and tested their interactions with seven legacy and novel BFRs most common in soils. Phospholipid Langmuir monolayers with appropriate composition were used as membrane models. These membranes were doped in the selected BFRs, and the incorporation of BFR molecules into the phospholipid matrix and also the effects of BFR presence on membrane physical properties and morphology were studied. It turned out that the seven BFRs differed significantly in their membrane affinity. For some, the incorporation was very limited, and others incorporated effectively and could affect membrane properties, while one of the tested molecules induced the formation of bilayer domains in the membranes. Thus, Langmuir monolayers can be effectively used for pretesting BFR membrane activity.

Effects of cell configuration and bipolar membrane on preparation of LiOH through bipolar membrane electrodialysis from salt lake brine

Bipolar membrane electrodialysis (BMED) is a promising process to prepare LiOH from the salt lake brine. Revealing the effects of the cell configuration and property of bipolar membrane (BM) on the mass transfer and current efficiency of BMED is crucial to promote its industrial application. Herein, two-compartment (C-B) and three-compartment (A-C-B), and three types of BMs (FBM, BP-1, and TWBP1) were systematically studied. Results show that three-compartment is superior to two-compartment, as the latter could restrain electromigration of Li+, enable recombination of H+ and OH–, and lead to lower current efficiency. Among three BMs, TWBP1 has highest current efficiency, while BP-1 can prepare LiOH solution with least impurity ions. To reveal the influencing mechanism of the BMs’ properties on the electromigration of Li+ and co-ions leakage, CVC curves and chronopotentiograms were detailly investigated. Results show that the higher energy consumption of BP-1 may be attributed to its highest specific resistivity, while its better co-ions selectivity is beneficial to prepare acid/base solutions with lesser impurities, indicating that effects of the specific resistivity and selectivity of BMs on BMED process for producing LiOH from salt lake brine is an important “trade-off” relationship needing to be balanced to realize the higher current efficiency and higher quality products.

Current status, challenges and prospects of antifouling materials for oncology applications

Targeted therapy has become crucial to modern translational science, offering a remedy to conventional drug delivery challenges. Conventional drug delivery systems encountered challenges related to solubility, prolonged release, and inadequate drug penetration at the target region, such as a tumor. Several formulations, such as liposomes, polymers, and dendrimers, have been successful in advancing to clinical trials with the goal of improving the drug’s pharmacokinetics and biodistribution. Various stealth coatings, including hydrophilic polymers such as PEG, chitosan, and polyacrylamides, can form a protective layer over nanoparticles, preventing aggregation, opsonization, and immune system detection. As a result, they are classified under the Generally Recognized as Safe (GRAS) category. Serum, a biological sample, has a complex composition. Non-specific adsorption of chemicals onto an electrode can lead to fouling, impacting the sensitivity and accuracy of focused diagnostics and therapies. Various anti-fouling materials and procedures have been developed to minimize the impact of fouling on specific diagnoses and therapies, leading to significant advancements in recent decades. This study provides a detailed analysis of current methodologies using surface modifications that leverage the antifouling properties of polymers, peptides, proteins, and cell membranes for advanced targeted diagnostics and therapy in cancer treatment. In conclusion, we examine the significant obstacles encountered by present technologies and the possible avenues for future study and development.

Cancer cell membrane cloaked fluorescent liposomes loaded with metal-phenolic complex nanoparticles for combinatorial therapy against breast cancer

The development of innovative strategies for effective cancer treatment remains a critical research focus. In this study, we present a novel approach by designing cancer cell membrane-cloaked fluorescent liposomes loaded with metal-phenolic complex nanoparticles for combinatorial therapy against breast cancer. This multifaceted therapeutic system leverages the unique properties of cancer cell membranes, fluorescent liposomes, and metal-phenolic complexes to create a highly targeted and versatile treatment platform. Cancer cell membranes serve as natural camouflage, allowing these nanoparticles to evade the immune system and specifically target breast cancer cells. The inclusion of fluorescent liposomes not only aids in real-time imaging of treatment progress but also enhances the therapeutic effect by providing photodynamic therapy. Metal-phenolic complexes provide a multifunctional payload, offering both thermally assisted cytotoxicity and the ability to modulate cellular pathways critical in cancer progression. The enhanced internalization found in 4T1 cell lines demonstrates the targeted efficiency of our nanosystem. We also observed a significant increase in intracellular reactive oxygen species (ROS), increased cell death, and a significant decrease in colony formation treated with the synthesized nanoparticles. Alteration in mitochondrial membrane potential indicated the onset of cellular apoptosis, which eventually resulted in cell death. The biomimetic CSpFeTA NPs exhibited remarkable deep tumor tissue penetration and apoptotic cell death assisted by NIR irradiation. The development of such a sophisticated nanosystem represents a significant advancement in cancer therapy, opening new avenues for personalized and effective breast cancer treatment.

Enhanced degradation of enrofloxacin in mariculture wastewater based on marine bacteria and microbial carrier

This study aimed to isolate marine bacteria to investigate their stress response, inhibition mechanisms, and degradation processes under high-load conditions of salinity and enrofloxacin (ENR). The results demonstrated that marine bacteria exhibited efficient pollutant removal efficiency even under high ENR stress (up to 10 mg/L), with chemical oxygen demand (COD), total phosphorus (TP), total nitrogen (TN) and ENR removal efficiencies reaching approximately 88%, 83%, 61%, and 73%, respectively. The predominant families of marine bacteria were Bacillaceae (50.46%), Alcanivoracaceae (32.30%), and Rhodobacteraceae (13.36%). They responded to ENR removal by altering cell membrane properties, stimulating the activity of xenobiotic-metabolizing enzymes and antioxidant systems, and mitigating ENR stress through the secretion of extracellular polymeric substance (EPS). The marine bacteria exhibited robust adaptability to environmental factors and effective detoxification of ENR, simultaneously removing carbon, nitrogen, phosphorus, and antibiotics from the wastewater. The attapulgite carrier enhanced the bacteria's resistance to the environment. When treating actual mariculture wastewater, the removal efficiencies of COD and TN exceeded 80%, TP removal efficiency exceeded 90%, and ENR removal efficiency approached 100%, significantly higher than reported values in similar salinity reactors. Combining the constructed physical and mathematical models of tolerant bacterial, this study will promote the practical implementation of marine bacterial-based biotechnologies in high-loading saline wastewater treatment.

Utilizing methacrylated lignin as a sustainable macro-crosslinker for synthesizing innovative PVA/AMPS composites crosslinked hydrogel nanofibers: A potential application for lithium-ion battery separators

There are significant issues with commercial separators that must be resolved before they can be used in high-energy-density batteries. These problems include low porosity, poor electrolyte wetting, and low mechanical properties. This study presents a facile method for preparing composite crosslinked hydrogel nanofibers of polyvinyl alcohol (PVA) with 2-acrylamide-2-methylpropanesulfonic acid (AMPS) for lithium-ion battery separators by utilizing methacrylated lignin (LMA) as a bio-based crosslinker. Initially, LMA was synthesized by grafting glycidyl methacrylate (GMA) onto lignin via esterification. Subsequently, a crosslinked hydrogel nanofiber membrane (PVA/AMPS-LMA) was electrospun with varying LMA fractions, which were polymerized by combining free radical copolymerization and esterification reactions. The effectiveness of LMA as a crosslinker was assessed against the N, N′-methylene bisacrylamide (MBA). The study showed that using LMA as a crosslinker significantly improved the membrane's properties. The PVA/AMPS-LMA separator displayed superior features such as mechanical strength, thermal stability, porosity, electrolyte uptake, ionic conductivity, and lithium-ion transference number, when compared with PVA/AMPS, PVA, and Celgard separators. Specifically, the PVA/AMPS-LMA separator demonstrated a high mechanical strength of 24.9 MPa, strong thermal stability at 170 °C with no shrinkage, high porosity (84.3 %), and electrolyte uptake (661.4 %). It also exhibited exceptional ionic conductivity (2.75 mS/cm) and a notable lithium-ion transference number (tLi+ = 0.717). In coin batteries, the PVA/AMPS-LMA separator retained over 96 % capacity (142.4 mAh/g) after 200 cycles at 1C. This performance exceeded that of PVA/AMPS, PVA, and Celgard separators, suggesting that PVA/AMPS-LMA separators have the potential to replace their commercial counterparts.

Localized surface plasmon resonance and atomic force microscopy study of model lipid membranes and their interactions with amyloid and melatonin

Alzheimer's disease (AD) is a progressive neurodegenerative disorder characterized by the accumulation of amyloid plaques in the brain. The toxicity of amyloid to neuronal cell surfaces arises from interactions between small intermediate aggregates, namely amyloid oligomers, and the cell membrane. The nature of these interactions changes with age and disease progression. In our previous work, we demonstrated that both membrane composition and nanoscale structure play crucial roles in amyloid toxicity, and that membrane models mimicking healthy neuron were less affected by amyloid than model membranes mimicking AD neuronal membranes. This understanding introduces the possibility of modifying membrane properties with membrane-active molecules, such as melatonin, to protect them from amyloid-induced damage. In this study, we employed atomic force microscopy and localized surface plasmon resonance to investigate the protective effects of melatonin. We utilized synthetic lipid membranes that mimic the neuronal cellular membrane at various stages of AD and explored their interactions with amyloid-β (1–42) in the presence of melatonin. Our findings reveal that the early diseased membrane model is particularly vulnerable to amyloid binding and subsequent damage. However, melatonin exerts its most potent protective effect on this early-stage membrane. These results suggest that melatonin could act at the membrane level to alleviate amyloid toxicity, offering the most protection during the initial stages of AD.

The Antiviral Activity of Interferon-Induced Transmembrane Proteins and Virus Evasion Strategies

The Antiviral Activity of Interferon-Induced Transmembrane Proteins and Virus Evasion Strategies

Exogenous polyserine fibrils change membrane properties of phosphatidylcholine-liposome and red blood cells

The causative genes for neurodegenerative polyglutamine (polyQ) diseases produce homopolymeric polyglutamine (polyQ), polyserine (polyS), polyalanine (polyA), polycysteine (polyC), and polyleucine (polyL) sequences by repeat-associated non-AUG (RAN) translation. The cytotoxicity of the intracellular polyQ and RAN products has been extensively investigated. However, little is known about the toxicity of the extracellular polyQ and RAN products on the membranes of viable cells. Because polyQ aggregates induce a deflated morphology of a model membrane, we hypothesized that extracellular polyQ and RAN products might affect the membrane properties of viable cells. In this study, we demonstrated that exogenous polyS fibrils but not polyS or polyQ non-fibril aggregates altered the thermal phase transition behavior of a model membrane composed of a phosphatidylcholine bilayer using differential scanning calorimetry. PolyS fibrils induced morphological changes in viable red blood cells (RBCs). However, both polyS and polyQ non-fibril aggregates had no effects on RBCs. These results highlight the possibility that extracellular fibrils generated from RAN products may alter the properties of neuronal cell membranes, which may contribute to changes in the brain pathology.

Impact of surfactant groups on the corrosion inhibition properties of superhydrophobic membranes on X80 steel

Fe2O3/Fe3O4 composite films were successfully prepared on the surface of X80 steel through hydrothermal synthesis and annealing treatments. Subsequently, the oxidised films were modified using surfactants such as decanoic acid (DA), decyl silane triol (DS) and perfluorodecyl silane triol (FDS), resulting in the creation of three distinct films exhibiting superhydrophobic properties. The effects of the hydrophilic and hydrophobic groups of surfactants on the superhydrophobic films of X80 steel were analysed using electrochemical methods, surface analysis techniques and theoretical calculations. The results showed that all three superhydrophobic films exhibited excellent corrosion resistance, with the order being DA > FDS > DS after 72 h of immersion in acidic conditions (pH = 6, 60 °C). Theoretical calculations showed that the adsorption performance of carboxyl groups was superior to that of silyl alcohol bonds, whereas fluorination of hydrophobic groups helped to enhance the adsorption capacity of hydrophilic groups. This not only reveals the key role of surfactants in the preparation of superhydrophobic membranes but also provides a theoretical basis for the preparation of superhydrophobic membranes on carbon steel surfaces.

Draft-free air conditioning through split membrane ceiling system: An exploratory study

The draft caused by convective air-conditioning is a primary contributor to thermal discomfort, particularly in localized cooling scenarios. While radiant systems offer a windless alternative, their condensation risks and maintenance costs bring concerns. In response, our research proposes an air-based radiation-convection hybrid system that’s draft-free and easy to implement. By suspending a breathable, flexible, textile-based membrane beneath the ceiling, the system mitigates drafts from ceiling-mounted air conditioners and leverages the membrane’s vast surface area for radiation. This work is an exploratory study focused on a retrofit split membrane system laying below the commercially packaged air conditioner (PAC). Three independent experimental studies were conducted. The first is a full-scale experiment assessing the membrane’s impact on PAC system operation and heat load management. The second is fundamental research to determine the permeation and airflow deceleration properties of different membranes. The third is a practical assessment in a self-study room retrofitted with the split membrane, aiming to determine the possibility of maintaining draft-free conditions. Results indicate that membranes with high laying ratios risk airflow short-circuiting. It can be reduced by adjusting the laying ratios and altering the laying pattern of the membrane, which also improves perimeter heat load management. Moreover, the permeation characteristics of various membrane materials were examined through flow and velocity attenuation coefficients. Besides material considerations, preliminary observations suggest that the membrane’s curvature could influence its permeation. Furthermore, the temperature and velocity data preliminarily affirmed the anti-draft performance of the split membrane ceiling system.